User Manual of Network Camera
pan/tilt unit has been installed).
Live View Parameters:
Configure the image size and stream type of the live video.
5.2 Starting Live View
In the live view window as shown in Figure 5-2, click
live view of the camera.
Icon
Description
Start/Stop live view
/
Manually capture the pictures displayed in live view and then
save it as a JPEG file.
Manually start/stop recording.
/
Audio on and adjust volume /Mute.
/
Turn on/off microphone.
/
/
Turn on/off 3D zooming function.
Note:
Before using the two-way audio function or recording with audio, please set
the Stream Type to Video & Audio referring to Section 5.4.
Full-screen Mode
You can double-click on the live video to switch the current live view into full-screen
or return to normal mode from the full-screen.
Please refer to the following sections for more information:
Configuring remote recording in Section 6.2 Configuring Recording Schedule.
Setting the image quality of the live video in Section 5.1 Configuring Local
Parameters and Section 5.4.1 Configuring Video Settings.
Setting the OSD text on live video in Section 5.5.2 Configuring OSD Settings.
5.3 Recording and Capturing Pictures Manually
In the live view interface, click
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Live View Toolbar
Figure 5-1
Descriptions of the Toolbar
Table 5-1
on the toolbar to capture the live pictures or
30
on the toolbar to start the