87
User Manual of Network Camera
10.6 Maintenance
10.6.1 Rebooting the Camera
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance:
2. Click
to reboot the network camera.
Reboot the Device
Figure 10-12
10.6.2 Restoring Default Settings
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click
or
to restore the default settings.
Restore Default Settings
Figure 10-13
Note:
After restoring the default settings, the IP address is also restored to
the default IP address, please be careful for this action.
10.6.3 Importing/Exporting Configuration File
Steps:
Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
1. Click
to select the local configuration file and then click
to
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.