Configuring And Handling Alarms; Configuring Motion Detection - HIKVISION Network Camera User Manual

User Manual of Network Camera
2. Click
3. Click
4. Check the checkbox to enable the function.
X Coordinate and Y Coordinate values are for the location of the picture on the image.
And the Picture width and Height are for adjusting the size of the picture.

6.6 Configuring and Handling Alarms

Purpose:
This section explains how to configure the network camera to respond to alarm
events, including motion detection, external alarm input, video loss, tamper-proof
and exception. These events can trigger the alarm actions, such as Notify Surveillance
Center, Send Email, Trigger Alarm Output, etc.
For example, when an external alarm is triggered, the network camera sends a
notification to an e-mail address.

6.6.1 Configuring Motion Detection

Purpose:
Motion detection is a feature which can take alarm response actions and record the
video for the motion occurred in the surveillance scene.
Tasks:
1. Set the Motion Detection Area.
Steps:
(1) Enter the motion detection settings interface
Configuration > Advanced Configuration> Events > Motion Detection
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
button to add a picture from your PC.
button to upload it.
54