NETWORK CAMERA User Manual V2.0.0 Hangzhou Hikvision Digital Technology Co., Ltd. http://www.hikvision.com Service Tel:400-700-5998 2009-8...
Page 2
DS-2CD852MF-E, DS-2CD762MF-FB(H), DS-2CD752MF-FB(H), DS-2CD752MF(-E), DS-2CD852F series Network Camera This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this manual. We will readily improve or update the products or procedures described in the manual.
3.7 Parameters Configuration through DS-9000 DVR ..................37 Chapter 4 Menu Introduction ............................. 38 4.1 Main Menu ..............................38 4.2 Menu Introduction of 2.0 Megapixels CMOS Network Camera ..............39 4.2.1 Language settings ..........................39 4.2.2 Flicker Control ..........................39 4.2.3 Resolution settings ..........................
User Manual of Network Camera Chapter 1 Introduction Network camera is a kind of embedded digital surveillance product that combines the features of both traditional analog camera and net DVS (Digital Video Server). Due to the embedded Linux operation system and the latest Davinci hardware platform of TI, the system operates with high scheduling efficiency.
1. Set the camera parameters via IE. 2. Set the camera parameters through the client software. Please make sure that the PC and network camera are connected and can ping successfully before the parameter setting. 3.1 Network Camera access model overview 3.1.1 Wireless Network (Only “-w”...
Fig. 3.1.4 Direct Line Connection 3.2 Visit Network Camera in LAN Before visiting network camera, user should detect its IP address. SADP is a tool software which can automatically detect hikvision’s network device in the LAN and give the device’s information like IP address, mask, port number, device serial number, software version and so on.
Note: Refer to Appendix 2 to for a detailed explanation about Port Map. Users can directly connect the network camera to the internet without using a router. Fig.3.6.1 Static IP through Router access IPC...
Page 40
Fig.3.6.5 PPPoE configuration dialog box It is inconvenient to view a network camera with a dynamic IP, therefore, users should register with a dynamic DNS service provider. (Such as DynDns.com) Domain name resolution contains normal domain name resolution and private domain name resolution.
Page 42
A PC with a static IP which is running the domain name resolution service is necessary. When the network camera connects to the internet through PPPoE and obtains an IP address, it will send its name and IP address to the resolution server. When the client software connects to the network camera, it will connect to the resolution server and tell the resolution server the expected camera’s name.
User Manual of Network Camera Chapter 4 Menu Introduction Note: In this chapter, we call DS-2CD852MF-E, DS-2CD752MF-FB, DS-2CD752MF(-E), DS-2CD852F, as 2.0 megapixels CMOS network camera. And call DS-2CD862MF-E, DS-2CD762MF-FB as 1.3 megapixels CCD network camera. 4.1 Main Menu Call preset 95 and the menu will appear on the screen.”IRIS +” means “enter”, while “IRIS -” means “cancel”.
User Manual of Network Camera The main menu displays as below: Fig.4.1.2 Main Menu 4.2 Menu Introduction of 2.0 Megapixels CMOS Network Camera 4.2.1 Language settings Press left / right to select language between Chinese and English; 4.2.2 Flicker Control Press left / right to select frequency between 50HZ and 60HZ in the FLICKER CONTROL item;...
Page 60
As the above mentioned setting, we map the router’s port 80, 8000, 554, 8200 to the network camera 192.168.1.23; and port 81, 8001, 555, 8201 to the network camera 192.168.1.24. In this way, user can visit the 192.168.1.23 through visiting the router’s port 80, 8000, 554 and 8200.