Configuring 802.1X Settings - HIKVISION Network Camera User Manual

User Manual of Network Camera
2. Check the corresponding version checkbox (
,
3. Configure the SNMP settings.
Note: The settings of the SNMP software should be the same as the settings you
configure here.
4. Click
Note: it will ask for a reboot for the settings to take effect.

6.3.6 Configuring 802.1X Settings

Purpose:
The IEEE 802.1X standard is supported by the network cameras, and when the
feature is enabled, the camera data is secured and user authentication is needed
when connecting the camera to the network protected by the IEEE 802.1X.
Before you start:
The authentication server must be configured. Please apply and register a user name
and password for 802.1X in the server.
Steps:
Enter the 802.1X Settings interface:
1.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
SNMP Settings
Figure 6-12
) to enable the feature.
to save and finish the settings.
42
,