Configuring Other Alarms - HIKVISION Network Camera User Manual

User Manual of Network Camera
Steps:
1. Enter the face detection settings interface:
Configuration > Advanced Configuration > Events > Face Detection
2. Check the Enable Face Detection to checkbox to enable the function.
3. (Optional)You can check the Enable Dynamic Analysis for Face Detection
checkbox if you want the face detected get marked with rectangle in the live
view.
4. Configure the sensitivity of face detection. The default value is 5.
5. (Optional)You can also configure the linkage action for face detection.

6.6.9 Configuring Other Alarms

Purpose:
This section is for the camera supporting external wireless alarm (e.g. access control
alarm), embedded PIR (passive infrared sensor) alarm and manual alarm by remote
control.
Study the wireless alarm and the remote control
Purpose:
The wireless alarm is the function of the camera to communicate to wireless alarm
devices such as the access control. The remote control or other remote alarm devices
must be compatible and learn each other's remote signal to communicate.
Before configure the wireless alarm, the camera must study the code of the wireless
alarm device.
Steps:
1. Enter the Remote Control interface:
Configuration> Advanced Configuration> System > Remote Control
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
65