Configuring Recording Schedule - HIKVISION Network Camera User Manual

73
User Manual of Network Camera
Initializing
Figure 7-3
When the initialization completed, the status of disk will become Normal.
View Disk Status
Figure 7-4
Notes:
 Up to 8 NAS disks can be connected to the camera.
 To initialize and use the SD card after insert it to the camera, please refer to the
steps of NAS disk initialization.

7.2 Configuring Recording Schedule

Purpose:
There are two kinds of recording for the cameras: manual recording and scheduled
recording. For the manual recording, refer to Section 5.3 Recording and Capturing
Pictures Manually. In this section, you can follow the instructions to configure the
scheduled recording. By default, the record files of scheduled recording are stored in
the SD card (if supported) or in the network disk.
Steps:
1. Enter the Record Schedule Settings interface:
Configuration > Advanced Configuration> Storage > Record Schedule
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.