Deleting A User Code; Duress User Code; Adding A Duress User Code; Secret Duress Button - 2gig Technologies GO!control 2GIG-CNTRL2 Operation And User's Manual

Deleting a User Code

1. Press one of the
USER buttons.
2. Press DELETE USER.
3. A confi rmation screen will display to
be sure you really want to delete the
user. If OK, press DELETE USER.
4. A confi rmation screen will show
which user was deleted. Press OK.
✓ NOTE: You cannot delete the Master User Code (User #1). It can only be changed.

Duress User Code

The Duress User Code (User Code #8) performs a special function. Controlling the system with this
code gives the appearance of normal operation, but using it secretly sends a "duress" report to the
Central Monitoring Station to initiate a silent alarm call for help.
USE THIS CODE ONLY IF SOMEONE IS FORCING YOU TO OPERATE YOUR SECURITY
SYSTEM AGAINST YOUR WILL. A silent report will be sent to the Central Monitoring Station and
they will dispatch help.

Adding a Duress User Code

1. Press the ADD USER 8
(DURESS) button.
2. A confi rmation screen will display;
press CREATE DURESS USER.
3. Enter a four-digit code for the new
Duress User Code and press OK.
4. Enter the Code again to confi rm
the code and press OK.
5. A confi rmation screen will
display; press OK.

Secret Duress Button

On the Home Screen, in the lower right corner, the Go!Control logo is displayed. The Go!Control
logo is the secret duress button.
With the system armed, pressing the Go!Control logo will display the standard disarm code entry
screen. Use a valid User Code or a Duress User Code to disarm the system. The system will disarm
normally, but a silent duress report will be sent to the Central Monitoring Station and they will
dispatch help.
The secret duress button can also be used when
the system is disarmed. Pressing the Go!Control
logo will display a code entry screen. Enter the
Duress User Code and a silent duress report
will be sent to the Central Monitoring Station
and they will dispatch help. The system will
remain disarmed.
CHANGE
System Toolbox
Delete User Confi rmation Screen
Duress User Selection Screen
Duress User Create Confi rmation Screen
Secret Duress Button
SECRET
DURESS
BUTTON
29