Arming To Away Mode - 2gig Technologies GO!control 2GIG-CNTRL2 Operation And User's Manual

All-in-one wireless security system
Hide thumbs Also See for GO!control 2GIG-CNTRL2:
Table of Contents

Advertisement

Arming to Away Mode

Use the Away Mode to arm the system when everyone will be leaving the home. The Away Mode
normally has an Entry Delay so someone with a User Code can re-enter without causing an alarm.
Interior and perimeter sensors are armed in the Away Mode.
1.
Close all sensor-protected doors and windows before arming.
2.
Verify that the
to arm. The SECURITY button and ARM button on the display will also be green when all
sensors are closed.
3.
From the Security Screen, or the Menu Screen, press
If there are any open door or window sensors, the Bypass Screen will appear. Close
all the sensors displayed or press BYPASS ALL to force bypass the displayed
sensors. NOTE: BYPASSED SENSORS WILL NOT BE ABLE TO TRIGGER AN ALARM.
To bypass sensors, you will need to enter a User Code unless
the installer has set the system for " Quick Bypass".
4.
On the Arming Screen, two check box options can be used with Away Mode.
The system can be armed without an
alarm instantly. The system will have to be disarmed with a wireless key fob. To arm
with all perimeter doors as instant, un-check the ENTRY DELAY option button.
When the
SILENT EXIT button is checked, the Exit Delay will be doubled,
and the beeps that normally sound during exit will not sound.
5.
Press
AWAY.
To arm the system, you may need to enter a User Code if your
installer has turned off the system's " Quick Arming" feature.
6.
The system will arm and show the
system is fully armed in the Away Mode.
When the system is armed in the Away Mode, beeps will sound during
the Exit Delay (faster beeps during the last 10 seconds). To silence these
beeps, press SILENCE (the Exit Delay will also be extended).
The Security Screen
Exit Delay Timer & Silence Button
button on the Control Panel is lit green, indicating that the system is ready
Entry Delay. All perimeter doors will trigger the
Exit Delay counting down. When the Exit Delay expires, the
Burglary Protection
ARM.
The Arming Screen
The Bypass Screen
13

Advertisement

Table of Contents
loading

Table of Contents