Chime Options - 2gig Technologies GO!control 2GIG-CNTRL2 Operation And User's Manual

System Toolbox

Chime Options

On doors and windows monitored by sensors, the system can sound a chime to announce that the
door or window was opened. Sensors can also be set to have the Control Panel say the name of the
opening. The chime and voice announcements only sound while the system is disarmed.
At the time of installation, the installer sets up each sensor's standard chime option. The person
with the Master User Code can change the chime options for each sensor to further customize the
system as desired.
✓ NOTE: As a global system option, the chimes for all the system's sensors can be turned
on or off using the CHIME check box on the Menu Screen.
To setup the chime options individually for each
sensor, use the following steps:
1. On the Home Screen, press
2. On the Security Screen, press
3. Note the two check boxes on the Menu
Screen. The CHIME check box button
turns the chimes on or off for all the
system's sensors. The VOICE check box
button turns the voice announcements
for the system's messages on or off
(except alarm voice messages).
4. On the Menu Screen, press
5. On the Toolbox Screen (1 of 3),
press CHIME SETUP.
6. Enter the Master User Code to
setup the chimes for the sensors.
7. The Chime Setup Screen will display
each of the installed sensors that can
chime and the option currently set for
the sensor. Press the sensor button to
change the sensor's chime options.
8. There are six chime options for each
sensor. Check the option that you
want for the sensor, then press OK.
CHIME OPTIONS
✓ Disabled
✓ Voice Only
✓ Voice with ding-dong
✓ Loud ding-dong
✓ Loud ding-dong with voice
✓ Ding-dong
9. Press BACK when fi nished.
34
SECURITY.
MENU.
TOOLBOX.
Menu Screen Global Chime Option Box
Toolbox Screen One
Chime Setup Screen
Chime Option Screen