System Trouble Alerts; Trouble Alert Icon; Nighttime Trouble Alert Holdoff - 2gig Technologies GO!control 2GIG-CNTRL2 Operation And User's Manual

System Trouble Alerts

The system monitors itself for abnormal operating conditions and will alert you if trouble is
detected.
The system monitors these and other conditions:
• AC power to the Control Panel
• The telephone line (optional)
• The cellular telephone connection (if used)
• The Control Panel's backup battery
• The sensor's batteries
• Sensor supervisory status (if used)
• External sounder connection
• Sensor radio reception and sensor tampering (sensor's case opened) when disarmed
• Control Panel tampering (panel's case opening) when disarmed (optional).
Trouble conditions can be reported to the Central Monitoring Station. Service to correct the trouble
condition should be preformed as soon as possible.

Trouble Alert Icon

If the system detects trouble, it will fl ash the trouble alert
three alert beeps every minute. Scrolling text along the top of the display also describes the trouble
condition(s) that exist.
The trouble alert
in the upper right corner that is the number of
current trouble alerts.
The trouble alert
the trouble alerts are acknowledged, then it
will light constant until all the troubles are
corrected. When all troubles are corrected, the
icon will disappear.
1. Press the trouble alert
to display all current trouble alerts.
2. View the listed trouble events. If there
are more than three alerts, use the ↑
and ↓ arrows to scroll through the list.
3. After viewing the trouble events,
press OK to acknowledge. This
will silence the alert beeps.

Nighttime Trouble Alert Holdoff

As an option, the system can be programmed by your installer to suppress the trouble alert sounder
from 10 PM to 9 AM. Any trouble alerts will still be displayed, but the sounder will not beep. Some
trouble conditions may clear automatically, other trouble conditions may require service to correct. If
the trouble condition still exists after 9 AM, the sounder will beep to indicate trouble. Regardless of
whether the trouble alert sounder is suppressed or not, every trouble condition is always displayed
on the trouble alert list and recorded in the system history event log.
22
icon displays a number
icon will fl ash until
icon button
icon on the Security Screen and sound
Trouble Alert Icon
Trouble Alert List
ICON