Fcc Part 68 Notice - 2gig Technologies GO!control 2GIG-CNTRL2 Operation And User's Manual

FCC Part 68 Notice

This equipment complies with Part 68 of the FCC rules and/or the requirements adopted by the Administrative Council for Terminal
Attachments (ACTA). On the rear of this equipment is a label that contains, among other information, a telephone products
identifi er in the form FCC ID: EF4 ... or US: EF4 ... and ringer equivalence number (REN). If requested, this information must be
provided to the telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable
FCC Part 68 rules and requirements as adopted by the ACTA. If provided, a compliant telephone cord and modular plug is included
with this product. The jacks and plugs are designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
A ringer equivalence number code (REN) is used to determine the quantity of devices that may be connected to the telephone
line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most, but not all
areas, the sum of the RENs should not exceed fi ve (5.0). To be certain of the number of devices that may be connected to the line,
as determined by the total RENs, contact the telephone company to determine the maximum REN for the calling area. For products
approved after July 23, 2001, the REN for this product is part of the product identifi er that has the format US: AAAEQ##TXXX.
The digits represented by the ## are the REN without a decimal point (e.g., 03 is REN of 0.3). For earlier products, the REN is
separately shown on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice is not practical, the telephone company will notify the customer
as soon as possible. Also, you will be advised of your right to fi le a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation
of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary
modifi cations in order to maintain uninterrupted service.
If trouble is experienced with this equipment, for repair and/or warranty information contact your installing alarm dealer for
information or a return product authorization (RPA). If the trouble is causing harm to the telephone network, the telephone
company may request you remove the equipment from the network until the problem is resolved. User repairs must not be made.
Doing so voids warranty.
This equipment must not be used on telephone company provided public coin service. Connection to party lines is subject to
state tariffs. Contact your state public utility commission for information. This equipment is hearing compatible (HAC) to any HAC
compatible attached handset telephones.
Network
Service
Provider's
Facilities
Telephone
Line
Network
Demarcation
Point
ALARM DIALING EQUIPMENT
If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of any other
non-alarm devices does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult
your telephone company or a qualifi ed installer.
WHEN PROGRAMMING EMERGENCY NUMBERS OR MAKING TEST CALLS TO EMERGENCY NUMBERS
1. Remain on the line and briefl y explain to the dispatcher the reason for the call.
2. Perform such activities in the off-peak hours, such as early mornings or later evenings.
3. Follow the central station operator's instructions for updated dialer
programming, if re-programming of the dialer is required.
Regulatory Information
Customer Premises Equipment and Wiring
RJ31X
Jack
Alarm Dialing
Equipment
Telephone
Answering
System
Computer
Unused
RJ-11 Jack
Fax Machine
Telephone
Telephone
Unused
RJ-11 Jack
43