GC2 Wireless Security System | User Guide
A second screen confirms that the
6
schedule was deleted. Tap Ok.
User Codes
Changing a User Code
At the User Management screen, tap the
1
User button to change the user code.
Ensure that the current user code
2
appears. Then tap Change Pin.
Enter a new four (4)‐digit user code to
3
use as the PIN. Then tap Ok.
To confirm the user code, enter then new
4
code again. Tap Ok.
A confirmation screen appears, showing
5
that the user code was changed. Tap Ok.
Deleting a User Code
To delete a user code from the User
1
Management screen, tap the User
button.
Tap Delete.
2
A confirmation screen appears to verify
3
that you want to delete the user code. If
Ok, tap Delete User or tap Cancel to
return to the user codes Access Option
screen.
32 Copyright © 2016 Nortek Security & Control
A confirmation screen appears displaying
4
the user code that was deleted. Tap Ok.
You can change the master user
TIP:
code, but you cannot delete it.
Duress User Code Setup
The Duress Code (User Code #8) initiates a
silent alarm for help by secretly sending a
Duress report to the Central Station.
Use the duress code when someone is
forcing you to operate your security system
against your will. When you use the duress
code, a silent report is immediately sent to
the Central Station and they will dispatch
help.
Setting the Duress User Code
On the User Management screen, tap
1
the User 8 (Duress) button.
A confirmation screen appears: Tap
2
Create Duress User.
Enter a four (4)‐digit code to use as the
3
new duress code. Then tap Ok.
To confirm the duress code, enter the
4
code again and tap Ok.
A confirmation screen appears. Tap Ok.
5
The User 8 edit screen appears. To return
6
to the User Management screen, tap
Back.