Accepting Print and Scan Jobs with Unknown IDs
You can specify whether to accept or reject print and network scan jobs from
computers that do not correspond with a registered Department ID.
NOTE
The default setting is 'On' for both <Allow ID Unknown Printer Jobs> and <Allow ID
Unknown Remote Scan Jobs>.
1
3
2
3-34
Card Reader-E1
(Additional Functions) ➞ [System Settings] ➞
Press
[Department ID Management].
If necessary, see the screen shots in steps 1 and 2 of "Changing the Password
and Page Limit," on p. 3-17.
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
(Log In/Out).
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
Select [On] or [Off] for <Allow ID Unknown Printer Jobs> or
<Allow ID Unknown Remote Scan Jobs> ➞ press [OK].
Allow ID Unknown Printer Jobs:
[On]: The machine accepts print jobs from computers that do not correspond
with a registered Department ID.
[Off]: The machine does not accept print jobs from computers that do not
correspond with a registered Department ID, and you must insert a control
card to operate the machine.
(numeric keys) ➞ press
-