Service Call Message
If a malfunction occurs and the machine cannot operate normally, a screen like the
one shown below is displayed. Follow the instructions that appear on the touch
panel display.
Contacting Your Local Authorized Canon Dealer
If a message like the one shown below appears, follow the procedure described
below.
WARNING
Do not connect or disconnect the power cord with wet hands, as this may result
in electrical shock.
CAUTION
Always grasp the power plug portion when disconnecting the power cord.
Pulling on the power cord may expose or snap the core wire, or otherwise
damage the power cord. If the power cord is damaged, this could cause an
electricity leak and result in a fire or electrical shock.
IMPORTANT
•
Sending or receiving documents cannot be done when the main power switch is OFF or
the power cord is disconnected.
•
If the main power switch is turned OFF, all jobs waiting in the print queue will be erased.
•
Documents received into memory and documents stored for delayed send will be
retained for approximately 60 minutes after the power cord has been disconnected.
Service Call Message
8
8-47