■ Offset Mode
The print output is shifted alternately to the front and back of the tray, in a vertical (portrait)
orientation, or a horizontal (landscape) orientation, depending on the orientation of your
originals. For example, if you place LTRR originals, the paper is output and shifted in the
horizontal direction. If you place LTR originals, the paper is output and shifted in the
vertical direction.
NOTE
•
If you press [Offset] when either the Collate or Group mode is set, each set of prints is
shifted before it is delivered to the output tray.
•
You can offset 11" x 17", LGL, LTR, or LTRR paper.
3
■ Staple Mode
Prints are automatically collated into sets arranged in page order and stapled. Prints are
stapled in the following places:
•
If an original is placed on the platen glass:
•
If originals are placed in the feeder:
3-10
Finisher-U2
Copies are stapled here.
Vertical Placement
Copies are stapled here.
ABC
Vertical Placement
Copies are stapled here.
Horizontal Placement
Copies are stapled here.
ABC
Horizontal Placement