Canon IMAGERUNNER 2030 i Reference Manual page 154

● If you want to set the System Monitor screen as the initial function
screen:
❑
Press [On] for <Set System Monitor Screen as initial function.> ➞ press [OK].
The System Monitor screen is displayed when the main power is turned ON, or
after the Auto Clear mode initiates.
The selected mode is set.
NOTE
If you do not want to set the Device Status screen as the default screen when you
press [System Monitor], press [Off] under <Set [Device] as the default for System
Monitor>. If you select [Off], the Copy Job Status screen is displayed when you
press [System Monitor].
4
Press [Done] repeatedly until the Basic Features screen
appears.
Specifying Common Settings
4
4-19