Return page 1 to the top, and then press the Start key.
Cause
Scanning was stopped due to a problem with the feeder.
Remedy
Arrange the originals in page order with the first page on top. Place the originals
back into the feeder's original supply tray, and then press
Waste toner is full./Replace the drum.
Cause
The drum unit is filled with waste toner.
Remedy
Contact your local authorized Canon dealer.
List of Error Codes without Messages
If a job or operation does not complete successfully, check the error code, and
perform the necessary operations according to the error code displayed. You can
check the error code on the Details screen when you press [Log] on the System
Monitor screen. (See "Copy/Print Job Details," on p. 5-9.)
If a send, receive, or fax job does not complete successfully, the error code is
printed in the Results column on the Activity Report and TX Report. (See Chapter
11, "Printing Communication Reports," in the Sending and Facsimile Guide.)
Perform the necessary procedures according to the error code.
NOTE
If a send job is canceled, "STOP" is printed in the Results column on the TX Report.
# 001
Cause
Paper or originals are jammed.
Remedy
Remove any jammed paper or originals. (See "Clearing Paper Jams," on p. 8-3,
and "Feeder," on p. 8-15.)
(Start).
List of Error Messages
8
8-43