1
4
1-18
Main Power and Control Panel Power
NOTE
•
Once the message <Ready to copy.> appears on the touch panel display, you can
specify settings. Copying or printing begins automatically, as soon as the machine
finishes warming up. (See Chapter 1, "Introduction to Copying," in the Copying
Guide.)
•
In the case above, the default settings are selected.
•
The default copy settings are:
- Copy Ratio:
- Paper Selection:
- Copy Exposure:
- Copy Quantity:
- Original Type:
- Copy Function:
•
The default settings for each function (Copy, Send, and Fax) of the machine are
already set at the factory, but you can change them to suit your needs. (See
Chapter 4, "Customizing Settings," in the Copying Guide, and Chapter 8,
"Customizing Communications Settings," in the Sending and Facsimile Guide.)
•
You can select which functions to display on the Basic Features screen when
turning the main power ON, according to the Additional Functions settings. (See
"Initial Function at Power ON," on p. 4-17.)
Press the appropriate keys in accordance with the messages
displayed on the touch panel display.
If there are no messages displayed, this step is unnecessary.
● If the message <You must insert a control card.> appears:
❑
Insert a control card into the optional Card Reader-E1.
The Basic Features screen is displayed.
Direct (100%)
Auto Paper Selection
Automatic Exposure Adjustment
1
Text
1 1-sided copy