Identifying The Type Of Paper In A Paper Source - Canon IMAGERUNNER 2030 i Reference Manual

NOTE
•
Regardless of the stack bypass setting, you cannot select 'Off' for all of the paper
sources at the same time. At least one of the paper sources, besides the stack
bypass must be set to 'On'.
•
If you selected [Printer] in step 3, the Stack Bypass icon ( ) will not be displayed
on the paper selection screen in step 4.
5
Press [Done] repeatedly until the Basic Features screen
appears.

Identifying the Type of Paper in a Paper Source

This setting enables you to specify the paper type loaded in each paper source.
Once you specify this information, icons indicating the type of paper loaded in each
paper source appear on the paper selection screen.
IMPORTANT
Be sure to correctly set the paper type. If the type of paper is not set correctly, it could
adversely affect the quality of the image. Moreover, the fixing unit may become dirty and
require a service repair, or the paper could jam.
NOTE
For the imageRUNNER 2018i,
Feeding Module-P1 is attached.
if the optional Cassette Feeding Module-Q1 is attached to the imageRUNNER
2030i/2025i/2022i/2018i.
1
Press
If necessary, see the screen shot in step 1 of "Initial Function at Power ON," on
p. 4-17.
(paper drawer 2) appears only if the optional Cassette
(paper drawer 3) and
(Additional Functions) ➞ [Common Settings].
(paper drawer 4) appear only
Specifying Common Settings
4
4-33