NOTE
If you make a mistake when entering the Department ID or password, press
(Clear) ➞ enter the correct values.
2
Press
(Log In/Out).
The Basic Features screen of the selected function appears on the touch panel
display.
NOTE
•
If using Department ID Management, the Department ID and message <After
using the machine, press the ID key.> are displayed alternately at the bottom of the
touch panel display.
•
If the Department ID or password that you entered is incorrect, the message <This
number has not been registered. Enter the number again.> appears. Repeat this
procedure from step 1.
Entering the Department ID and Password
2
2-23