Canon IMAGERUNNER 2030 i Reference Manual page 299

7
7-6
Paper Drawers
IMPORTANT
•
Paper which has been rolled or curled must be straightened out prior to use.
•
Make sure that the height of the paper stack does not exceed the loading limit mark
( ) at the back of the paper drawer, and that the paper is tucked below the paper
size guide clips.
•
Be sure to set the paper size lever correctly. If the lever is set to the wrong position,
paper jams or dirty prints may occur, or the inside of the machine may get dirty.
(See "Adjusting a Paper Drawer to Hold a Different Paper Size," on p. 7-8.)
NOTE
•
Each paper drawer holds approximately 250 sheets of paper (22 lb bond
2
(80 g/m )).
•
If there are instructions on the package of paper about which side of the paper to
load, follow those instructions.
•
When the paper is loaded into the paper drawer, the side facing up is the one
printed on.
•
If problems occur, such as poor print quality or paper jams, try turning the paper
stack over, and reload it.
•
For more information on the print direction of preprinted paper (paper which has
logos or patterns already printed on it), see "Relationship between Original
Orientation and Preprinted Paper Output Chart," on p. 9-11.
Paper Size Guide Clips