2
2
3
2-18
Entering Characters from the Touch Panel Display
Enter <Canon>.
To enter uppercase letters, press [Shift].
To enter a space, press [Space].
To move the cursor, press [ ] or [ ].
To enter symbols, press [Entry Mode] ➞ select [Other] ➞ enter the desired
symbols.
The characters you entered are displayed, as shown below.
NOTE
•
If you make a mistake when entering characters, press [ ] or [ ] to position the
cursor on the right side of the characters to be deleted ➞ press [Backspace] to
delete the characters ➞ enter the correct characters.
•
To delete all of the characters you have entered, press
•
The available entry modes, and the maximum number of characters that you can
enter vary, depending on the type of entries you are making.
When you have entered all characters, press [OK].
(Clear).