3
The screen shown below is displayed while the system
software is loading.
The Start Up screen is displayed until the machine is ready to scan.
If a message is displayed on the touch panel display, proceed to step 4.
The machine is ready to scan in approximately eight seconds (at a room
temperature of 68°F) after the screen above appears.
The screen below is displayed when the machine is ready to scan.
IMPORTANT
•
If you turn OFF the main power, wait at least 10 seconds before turning the main
power back ON.
•
Do not turn the main power OFF if you want to be able to send or receive I-fax or
fax documents. Sending or receiving I-fax or fax documents cannot be done when
the main power is turned OFF.
•
If User ID Management is set to 'On', the machine will take longer to become ready
to scan.
Main Power and Control Panel Power
1
1-17