Canon IMAGERUNNER 2030 i Reference Manual page 156

2
Select [Initial Function] or [Selected Function] ➞ press [OK].
Details of each item are shown below.
[Initial Function]:
[Selected Function]:
The selected mode is set.
3
Press [Done] repeatedly until the Basic Features screen
appears.
The screen specified as the initial function is displayed
after the Auto Clear mode initiates. For example, if you set
the System Monitor screen as the initial screen, and Auto
Clear initiates while a settings screen for the Send
function is shown, the display returns to the System
Monitor screen.
The display returns to the main screen of the function that
was displayed before the Auto Clear mode activated. For
example, if you set the System Monitor screen as the initial
screen, and Auto Clear initiates while a settings screen for
the Send function is shown, the display returns to the
Send Basic Features screen.
Specifying Common Settings
4
4-21