Advanced Features; Home; Status - NetComm 3G22WV User Manual

Advanced Features

The basic configuration interface is intended to provide access to all the settings that most people will want to use on their
3G22WV. There are advanced settings available if desired which are accessible by viewing the advanced settings pages.

Home

Clicking the Home menu item will return you to the Basic View page.

Status

The status page provides system related information and is displayed when you login to the 3G22WV management console and
switch to Advanced View. By default, the status page will show System Information, Mobile Broadband (MBB), Connection Status
and Ethernet Port Status settings.
ITEM
System Information Section
System Uptime
Router Version
Phone Module
Mobile Broadband (MBB) Section
Profile Name
Interface
Status
APN
IP Address
Connection Status Section.
Provider
Frequency
IMEI
Signal Strength
SIM Status
LAN port Mode
The LAN1 port can also operate as a WAN port for connecting to a bridged Ethernet device such as an xDSL modem. Using the
pull down menu in the "Ethernet Port Status" section, select the LAN1 mode applicable for your environment.
To view the LAN, PPPoE or Call Forwarding status, click on the relevant link below the green menu bar. Each of these sections is
hidden by default. To view them all, click on the "All Status" button. Each section contains a breakdown of information relevant to
the connection type or function.
3G22WV – 3G WiFi Router with Voice User Guide
19
Figure 13 - Advanced View – Status
The current amount of time the router has been connected to the internet.
The firmware version running on the router.
The type of phone module and the firmware version of the module.
The name of the current mobile broadband profile in use.
The type of connection the mobile broadband profile is using.
The current status of the internet connection.
The Access Point Name being used to connect to the mobile broadband provider.
The WAN IP address of the current internet connection.
The mobile broadband provider being used to connect to the internet.
The frequency band currently in use.
The IMEI (International Mobile Equipment Identity) of the router, a unique code for identifying devices on a
cellular GSM network.
The strength of the mobile broadband signal detected
The status of the SIM card that is currently inserted into the router.
Table 11: Advanced View - Status Settings
DEFINITION
www.netcommwireless.com