NetComm 3G22WV User Manual page 34

Mac/IP/Port Filtering
This page allows you to setup MAC, IP and port filtering rules to protect your network from malicious activity. The filtering rules can
be used to either allow or block certain users and/or ports from accessing the Internet.
OPTION
Basic Settings
MAC/IP/Port Filtering
Default Policy
MAC/IP/Port Filtering Settings
MAC Address:
Destination IP Address:
Source IP Address:
Protocol:
Destination Port Range:
Source Port Range:
Action:
Comment:
www.netcommwireless.com
Figure 34: Advanced View - Services - MAC/IP/Port Filtering
Select Enable to enable the MAC/IP/Port Filtering feature on the 3G22WV.
Select whether packets that do not match any of the configured rules are accepted or dropped by the router.
The MAC address of a local computer or network device attempting to access the 3G27WV-R's network.
The destination IP Address for the filter rule.
The source IP Address for the filter rule.
Select the port number's protocol type (TCP, UDP or both). If you are unsure, use the default "TCP&UDP"
setting.
The destination Port Range of the filter rule. If there is only one port involved enter the same port number in
both text fields.
The source Port Range of the filter rule. . If there is only one port involved enter the same port number in both
text fields.
Either accept or drop the packet that matches all of the rule specifications.
Add a comment to identify the purpose of the rule (optional).
Table 23: Advanced View - Services - MAC/IP/Port Filtering
DEFINITION
3G22WV – 3G WiFi Router with Voice User Guide
34