NetComm 3G22WV User Manual page 26

LAN - Advanced Setup
The Advanced Setup LAN page has settings that should only be configured by experienced administrators. The following page
provides a brief overview of the features available.
FIELD
802.1d Spanning Tree
LLTD
IGMP Proxy
UPnP
Router Advertisement
PPPoE Relay
The default is "Disable", select "Enable" to enable this option. The Spanning Tree protocol is used to stop loops when using wireless
distribution system (WDS) links as redundant links in a distribution system.
www.netcommwireless.com
Figure 24: Internet Settings - LAN - Advanced Setup
DESCRIPTION
The default is "Disable", select "Enable" to enable this option. The Spanning Tree
protocol is used to stop loops when using wireless distribution system (WDS) links as
redundant links in a distribution system.
This field is the Link Layer Topology Discovery (LLTD) protocol. The default setting is
"Disable". Select "Enable" to enable this option.
The field is the Internet Group Management Protocol (IGMP) protocol. The default
setting is "Disable". Select "Enable" to utilise this feature.
The default option Universal Plug and Play (UPnP) is "Enabled" and is used by a
network device to be automatically identified by other UPnP devices. Select "Disable"
to disable this option.
Used in multicasting the Router Advertisement function periodically sends ICMP router
discovery messages to identify other routers nearby. The default option is "Disable".
Select "Enable" to enable it.
PPPoE relay is also known as half bridge mode half bridge and will make the DHCP
duplicate the WAN IP address from the ISP to the local client PC. The default option is
"Disable". Select "Enable" to enable it.
Table 17: Internet Settings - LAN - Advanced Settings
3G22WV – 3G WiFi Router with Voice User Guide
26