NetComm 3G22WV User Manual page 50

SMS
The SMS tools application has been developed to include basic SMS functionality such as sending a message, receiving a message
and redirecting an incoming message to another destination. You can also utilise this functionality to read and change run-time
variables on the router.
Basic functionality supported:
Ability to send a text message via a 3G network and store in permanent storage

 Ability to receive a text message via a 3G network and store in permanent storage
Ability to forward incoming text messages via a 3G network to another remote destination which may be a TCP/UDP

server or other mobile devices.
Setup
General SMS functionality is enabled by default. You can open the Setup page in order to configure additional settings. To do this,
click on "SMS" and then "Setup".
OPTION
General SMS Configuration
Memory Status
Message Status
SMS Enable/Disable
Messages / Page
Encoding Scheme
SMSC Address
SMS Configuration for Redirection
Redirect to Mobile
Redirect to TCP
TCP Port to Redirect
Redirect to UDP
UDP Port to redirect
Incoming text messages can be redirected to another mobile device and/or a TCP/UDP message server using the settings listed
under the "SMS Configuration for Redirection" heading.
Redirect to Mobile
You can forward incoming text messages to a different destination number. This destination number can be another mobile phone
or 3G router phone number. To disable the feature, simply delete the number in the "Redirect to Mobile" field and click the "Save"
button.
www.netcommwireless.com
Figure 54 - Advanced View - SMS - Setup
Shows the current number of available and used SMS storage slots available on the SIM.
Shows the location of the SMS messages currently stored on the SIM.
The SMS functionality can be disabled or enabled using this field.
Enter the number of SMS messages to display per page.
The encoding method used for SMS messages.
Every cellular network has an SMS centre (SMSC) that handles all SMS message routing and
regulates each SMS message according to network traffic demands. This address is usually a
standard phone number and is essential for SMS functionality with the 3G22WV.
Forward incoming text messages to a remote destination can be defined here.
Forward incoming text messages to the remote TCP destination can be defined here.
The TCP port which will be used to connect to the remote destination.
Forward incoming text messages to the remote UDP destination can be defined here.
The UDP port which will be used to connect to the remote destination.
Table 33 - Advanced View - SMS Settings
DEFINITION
3G22WV – 3G WiFi Router with Voice User Guide
50