NetComm 3G22WV User Manual page 37

Security Settings
This section allows you to configure the wireless security for your 3G22WV. Setting up sufficient wireless security can prevent
unauthorized access to your wireless network.
OPTION
SSID
Activate this SSID
Broadcast SSID
Network Authentication
WPA Pre-Shared Key
WPA Group Rekey
Interval
WPA Encryption
Network Authentication
You may choose from the following wireless security options:
Disabled

Open

 Shared
 WPA
WPA-PSK

WPA2

 WPA2- PSK
WPA-PSK-WPA2-PSK

WPA1-WPA2

 802.1x.
3G22WV – 3G WiFi Router with Voice User Guide
37
Figure 37 - Advanced View - WiFi Security Settings
The network name that appears when you scan for wireless networks to join.
Enables or disables the SSID
Enables or disables the SSID being broadcast. When enabled, your wireless network is visibly to devices when they
scan for a network to join.
Select the security mode for the wireless network. See below for more information
The pre-shared key necessary to connect to the wireless network.
The time in seconds that the WPA group key is refreshed. The group key is used to encrypt the wireless connection
and regularly changing the group key provides extra security to your wireless network. In most cases, the default
value of 600 is sufficient. You should not change this setting unless instructed to by technical support.
Displays the encryption method in use.
Table 26 - Advanced View - WiFi Security Settings
DEFINITION
www.netcommwireless.com