NetComm 3G22WV User Manual page 27

WAN
The WAN page allows you to configure the optional WAN Ethernet port. Select the WAN connection type suitable for your
environment and configure parameters according to the selected connection type.
STATIC (fixed IP)
If your WAN connection uses a static IP address, please select "STATIC (fixed IP)" and fill in the required information in the fields
provided.
Please refer to the
enabling the Failover notification function.
FIELD
IP Address:
Subnet Mask:
Default Gateway:
Primary/ Secondary DNS:
Click 'Apply' to save the settings.
DHCP
This connection will get the IP address from the Internet service provider. Leave everything as default unless instructed by your
Internet Service Provider.
Please refer to the
enabling the Failover notification function.
Click 'Apply' to save the settings.
3G22WV – 3G WiFi Router with Voice User Guide
27
Figure 25 - Advanced View - WAN - Static IP Settings
WAN Failover Backup section on page 29 for information on configuring the WAN failover feature and
Type in the IP address assigned by your Internet Service Provider
Type in the Subnet mask assigned by your Internet Service Provider
Type in the WAN Gateway assigned by your Internet Service Provider
Type in the DNS address assigned by your Internet Service Provider
Table 18 - Advanced View - WAN Settings - Static IP
Figure 26 - Advanced View - WAN - DHCP Settings
WAN Failover Backup section on page 29 for information on configuring the WAN failover feature and
DESCRIPTION
www.netcommwireless.com