Advertisement
Quick Links
Advertisement
Related Manuals for NetComm Dynalink MyZone 3G24W
Summary of Contents for NetComm Dynalink MyZone 3G24W
- Page 1 Remote Administration Setup (MyZone 3G24W)
-
Page 2: Remote Administration
/ router for port 80 (or the applicable remote administration access port) pointing to your VOIP ATA’s IP address. If your modem / router is a NetComm or Dynalink unit, please see the appropriate “Port Forwarding” support document for assistance with adding this rule. - Page 3 Enabling Remote Administration This guide will take you through the steps required to enable remote administration access to your modem / router / VOIP ATA. 1. Navigate to http://my.zone http://192.168.10.50 in a web browser. 2. Enter 'admin' (without quotes) for both username and password and click Submit.
- Page 4 3. Select Switch to Advanced View.
- Page 5 4. Select System > Administration. 5. Set Remote Administration to Enable and enter the remote administration port you wish to use. The default port number is 8080. 6. Press Save. You should now be able to access your modem via the address: http://<your external IP address>...