Liberty series hspa+ wifi router with voice (61 pages)
Summary of Contents for NetComm 3G29Wn
Page 1
July 2011 Official Release Date 1. Connect the correct PSU into the Power port of the 3G29Wn and power it ON by pressing the Power button next to the Power port. 2. Connect the computer to any LAN socket on the 3G29Wn and wait for about 2 minutes until the computer gets the proper IP address (192.168.1.x, x=2-254)
Release Date 7 July 2011 6. Click Update Software. Warning: do not power off the 3G29Wn during firmware update process. The process should take about 3-5 minutes. 7. Once it is done, please navigate to Basic > Home and verify the firmware version is K611-402NCM2-T02_R05.bin.