NetComm 3G22WV User Manual page 13

Step 2
It is recommended for security purposes that you change the default username and/or password. Enter a secure username and/or
password then confirm the password.
Step 3
Use the radio buttons to turn the Wireless radio on or off. When SSID Broadcast is enabled, the network name will show up when
you do a scan for WiFi networks on your client devices. If you disable this, you must know the name of the SSID to connect to the
wireless network. In the SSID Broadcast Name field, enter a recognisable name for your network so that you can easily identify it
when it comes time to connect wirelessly from a client.
3G22WV – 3G WiFi Router with Voice User Guide
13
Figure 4 - Setup wizard Step 2
Figure 5 - Setup wizard Step 3
www.netcommwireless.com