Internet - NetComm 3G22WV User Manual

Internet

The 3G Operation Mode can be configured on this page. Please see the table below for options allowed for the 3G operation mode:
OPTION
Automatically Configure My
Mobile Broadband
Mobile Broadband
Custom APN (if required)
Country
SIM Status
PIN
Confirm PIN
Remember PIN
You can also elect to enable the "Automatically Configure My Mobile Broadband" option. This option attempts to automatically fill
out the correct APN from your mobile broadband SIM card enabling you to connect to the applicable mobile service. Please verify
the APN detected is correct by clicking on the Status tab. The current APN will be listed above the "SIM Status" field.
Alternatively, you can disable the "Automatically Configure My Mobile Broadband" option and manually enter the APN you would like
to use.
If the "Automatically Configure My Mobile Broadband" option does not correctly detect your APN and you are unsure of what to
enter manually, please contact your mobile broadband service provider for more information.
www.netcommwireless.com
Figure 12 - Basic View – Internet
The router will attempt to automatically detect the mobile broadband provider and APN of the inserted SIM car.
If your SIM card has a PIN code or requires a username or password to connect do not select this option.
Select to enable or disable the mobile broadband profile.
Enter an APN if the Auto Config option does not correctly identify your mobile broadband service setting's APN.
Select the country you wish to operate the router in.
The current status of the inserted SIM. If 'SIM PIN' is shown, enter the SIM PIN code in the fields below.
Enter the SIM PIN code numbers here (if required).
Re-enter the SIM PIN code numbers here (if required).
Select to remember the entered SIM PIN. Selecting yes for this option means you will not need to enter the PIN
code again to use the inserted SIM card.
Table 10 - Basic View - Internet Settings
DEFINITION
3G22WV – 3G WiFi Router with Voice User Guide
18