NetComm 3G22WV User Manual page 56

Administration
The Administration page is used to enable or disable remote administration and set the username / password required to access
the 3G22WV remotely.
OPTION
Firewall Settings
Firewall Use this option to disable or enable the router's firewall.
Enable HTTP Enable or disable remote HTTP access to the router. You can also set the port you would like remote HTTP access to be available on.
Enable Telnet Select this option to enable the router to be accessed and configured using telnet commands.
Enable Ping Select this option to enable the router to be pinged from remote devices.
Web User Interface Account Settings
Admin Password Enter the new password for the selected user account.
Confirm Password Re-enter the new password for the selected user account.
Telnet Account Settings
Admin Password Enter the new password for the selected telnet user account.
Confirm Password Re-enter the new password for the selected user account.
Please note: The password will only be changed if you enter two matching passwords. It is not necessary to change the
password if you are only changing the incoming port number.
To access the router's configuration pages remotely from a remote computer, perform the following steps:
1. Open a new browser window (e.g. Internet Explorer, Firefox, Safari ...).
2. In the address bar, enter the router's WAN IP address and assigned port number, e.g. "10.10.10.10: 8080".
Please note: You can find the router's WAN IP address by clicking on the "Status" menu. The Local field in the WWAN
section shows the router's WAN IP address.
3. Click "Login" and type "admin" in the Username and "admin" in the Password fields (without quotes). Then click on "Submit".
www.netcommwireless.com
Figure 61 - Administration Configuration Items
DEFINITION
Table 35 - Administration Configuration Items
3G22WV – 3G WiFi Router with Voice User Guide
56