NetComm 3G22WV User Manual page 22

Band Settings
The band settings page enables you to select which frequency band you will use for your connection and enable you to scan for
available network operators in your area.
The default setting of "All bands" should be appropriate for the majority of users.
You can also scan for available mobile broadband service providers in your area by selecting "Manual" for the "Current Operator
Selection Mode" and then clicking the scan button.
A list of the detected mobile broadband service carriers in your area will be displayed. Select the most appropriate 3G service from
the list shown and click "Apply".
The default setting of "Automatic" should be appropriate for the majority of users and locations.
www.netcommwireless.com
Figure 17 - Advanced View – Band Selection
Figure 18 - Advanced View – Operator Selection
3G22WV – 3G WiFi Router with Voice User Guide
22