Additional Product Information; Accessing A Connected Usb Drive - NetComm 3G22WV User Manual

3g wifi router with voice
Hide thumbs Also See for 3G22WV:
Table of Contents

Advertisement

Additional Product Information

Accessing a connected USB drive

USB drives connected to one of the 3G22WV's USB ports may be accessed over the network.
Note: The 3G22WV supports reading and writing to FAT32 and NTFS formatted drives only.
To access a USB drive connected to the 3G22WV:
1.
Open Windows Explorer and in the address bar, type
of the router, replace the default IP address with the one you configured for the router.
2.
The Windows Explorer window changes to show a list of attached devices. The screenshot below shows a connected drive
listed as "Disk A".
3.
To access the files stored on the drive, double click on the "Disk A" link. The files on the drive are displayed.
www.netcommwireless.com
\\192.168.20.1
Figure 66 - List of attached devices
Figure 67 - FIles stored on USB disk
then press Enter. If you have changed the IP address
3G22WV – 3G WiFi Router with Voice User Guide
60

Advertisement

Table of Contents
loading

Table of Contents