How To Reorder Scanner Consumables; Ac Power And Host Connection; Figure 13. Power Cord Receptacle - Bell and Howell Copiscan 8000 Plus Series Operator's Manual

Deluxe models also include the following items:
• Color dropout filters
• Imprinter cartridge

4.2.1 How to Reorder Scanner Consumables

Use the Reorder Fax Sheet on the 8000 Plus CD to reorder all scanner consumable items
and/or maintenance kits.
If you do not have a Reorder Fax Sheet, call a Bell & Howell sales representative or visit
our online store at www.bellhowell.imagingcomponents.com.
4.3

AC Power and Host Connection

Once you have set up the scanner, you are ready to connect it to an AC power source and
to the host computer.
Take the following steps to connect the scanner to AC power:
1. Plug the female end of the power cord into the power receptacle on the rear of the
scanner.
NOTE:
You can plug the scanner into either a 115 VAC or a 230 VAC outlet. The scanner
senses the voltage and automatically adjusts itself.
2. Connect the three-pronged male end of the power cord into a properly grounded,
three-hole AC outlet.
www.bellhowell.imagingcomponents.com
1-800-SCAN495
Copiscan 8000 Plus Series Operator Manual

Figure 13. Power Cord Receptacle

19
August 25, 2000