Control Panel Buttons; Multifeed Ignore; Cleaning Menu; Figure 16. Multifeed Error - Bell and Howell Copiscan 8000 Plus Series Operator's Manual

Hide thumbs Also See for Copiscan 8000 Plus Series:

Table of Contents

Copiscan 8000 Plus Series Operator Manual

5.2.1 Control Panel Buttons

The following subsections detail each control panel button and its function.

Figure 17. READY Menu with Multifeed Ignore Enabled

MULTIFEED IGNORE allows a page that would normally trigger a multifeed error to be

fed. It does this by temporarily turning off multifeed detection just for that page. This is

useful for occasional pages within a stack that may falsely trigger a multifeed error, for

instance because a label has been applied to the document.

MULTIFEED IGNORE enables and disables the multifeed ignore function. The button is

only active after a multifeed error has been reported (Multifeed detection must be set to

STOP in the SETUP menu). After the multifed document is returned to the top of the

stack in the feeder, MULTIFEED IGNORE can be enabled to clear the error and ignore

the multifeed error that would be generated by feeding this document. After this

document is fed, the multifeed detection setting is automatically restored to STOP for the

rest of the batch.

NOTE:

Note that with VRS Auto-Resolve enabled, after a multifeed, scanning will resume as

soon as CLEAR or the MULTIFEED IGNORE button is pressed, so make sure that the

multifed document is returned to the top of the stack in the feeder before pressing one

of these keys.

The CLEANING MENU button allows you to conveniently access the scanner cleaning

menu. This menu gives the option to start the scanner transport so that cleaning sheets

can be fed through the transport and skimmer assembly.

To use the CLEANING MENU feature, press the CLEANING MENU button. A cleaning

menu with START, STOP, and EXIT options will appear on the control panel display.

Select START to start the transport, select STOP to stop the transport, and select EXIT to

exit the cleaning menu.

www.bellhowell.imagingcomponents.com

August 25, 2000

1-800-SCAN495

Table of Contents