Front Of The Scanner; Exit Tray - Bell and Howell Copiscan 8000 Spectrum Operator's Manual

The operator controls let you capture information from a wide variety of
foreground/background and color/intensity combinations.
As documents travel through the transport, they are guided by seven sets of transport
rollers. Documents are delivered to the stacking surface on the exit tray, while the
scanner maintains the original document feed sequence. Both the feeding and retrieval of
documents are executed from the front of the scanner.
2.1

Front of the Scanner

This section introduces you to key components located on the front of the scanner. These
are components that you will use to operate the scanner and monitor its status. Section 5,
Operation contains detailed instructions about how to operate and read these
components. The figure below illustrates the front of the scanner and points out where
the components are located.
The table below provides a legend for the above figure.
1
2
3
4
5
6
www.bbhscanners.com
1-800-SCAN-494 Sales
1-800-SCAN-495 Technical Support
Copiscan 8000 Spectrum Operator Manual
Figure 2. Front View of Scanner
Right Hand Document Feed Guide
Side Access Panel
Control Panel

Exit Tray

Opening Handle
Left Hand Document Feed Guide
6