Scanner Specifications; Recommended System Configuration Guidelines - Bell and Howell Copiscan 8000 Plus Series Operator's Manual

3. Scanner Specifications

Model Type
Resolution
Document Sizes
Thickness
Throughput Rate
8.5" x 11" landscape
(21.59 cm x 27.94 cm)
at 200 dpi
Host Interface
Electrical
Requirements
Power Usage
Size (H x W x D)
Weight
Feeder Capacity
Environmental
Requirements
3.1

Recommended System Configuration Guidelines

NOTE:
Contact your scanning application software vendor for system requirements, since the
application software drives the system requirement piece, not the scanner.
www.bellhowell.imagingcomponents.com
1-800-SCAN495
Copiscan 8000 Plus Series Operator Manual
Copiscan 8000 Plus Series Specifications
Copiscan 8080S, 8080D, 8100D, 8125D
200-400 dpi, scaleable in 20 dpi increments
ADF Mode:
Min. 2.6" (w) x 2.6" (l)
6.6 cm (w) x 6.6 cm (l)
Max. 11.7" (w) x 17+" (l)
29.7 cm (w) x 43.2+ cm (l)
ADF Mode (single sheets):
0.0018" to 0.008"
0.046 mm to 0.20 mm
8080 80 ppm
8100 100 ppm
8125 125 ppm
Proprietary video interface compatible with commercially
available image compression boards or standard 50 PIN SCSI
II connector.
115-230 VAC, Autosensing
50-60 Hz
450 watts maximum
18" x 22.75" x 27.5" with feeder
45.72 cm x 57.79 cm x 69.85 cm with feeder
103 lb. (46.72 kilos)
Single feeder with 500 sheet mode and Manual Feed Mode
Temperature = 16° to 37°C (60° to 100°F)
Relative Humidity = 20% to 80% (non-condensing)
10
Manual Mode:
Min. 2.6" (w) x 4" (l)
6.6 cm (w) x 10.2 cm (l)
Max. 11.7" (w) x 17+" (l)
29.7 cm (w) x 43.2+ cm (l)
Manual Mode:
0.0018" to 0.02"
0.046 mm to 0.51 mm
August 25, 2000