Adf And Manual Modes - Bell and Howell Copiscan 8000 Plus Series Operator's Manual

Hide thumbs Also See for Copiscan 8000 Plus Series:

Table of Contents

5.3.3.2 ADF and Manual Modes

The scanner can be set in two different paper feeding modes, ADF (Automatic Document

Feed) mode and MANUAL FEED mode. Use ADF mode when you are feeding

documents that are similar in size, weight, and color density. Use the MANUAL FEED

mode when feeding mixed batch applications, or documents that are different sizes and

weights.

To set the scanner in ADF mode, follow the directions below:

1. Make sure that the scanner is in the proper mode before scanning. It should say

AUTO FEED on the READY menu. If it says MANUAL FEED instead of AUTO

FEED, press the RIGHT key until you to get to the SELECT FEEDER MODE menu.

2. In the SELECT FEEDER MODE menu, select F1 for ADF mode.

3. Lower the manual/autofeed lever on the feeder to the A position.

4. Lift the skimmer assembly.

5. Place the documents in the feeder.

6. Set the feeder guides to the proper width so that the documents are center-justified.

7. Push the skimmer assembly down.

8. Begin scanning procedures by following software application instructions.

To set the scanner in Manual mode, follow the directions below:

1. Make sure that the scanner is in the proper mode before scanning. It should say

MANUAL on the READY menu. If it says AUTO FEED instead of MANUAL, press

the RIGHT key until you get to the SELECT FEEDER MODE menu.

2. Press F2 to select Manual mode.

3. The LCD flashes the following messages until you move out of that menu:

• OPEN FEEDER GUIDES

• LIFT SKIMMER

• SET KNOB TO M

4. Align feeder guides to the A3/M paper size mark on the feeder tray.

5. Lift up the skimmer assembly.

6. Move the manual/autofeed lever to the M position.

7. Feed the documents through the scanner manually with the left edge of the paper

against the left guide. The scanner will beep and the upper right corner of the READY

menu will indicate that your system is ready to scan a manually-fed document.

www.bellhowell.imagingcomponents.com

1-800-SCAN495

Copiscan 8000 Plus Series Operator Manual

August 25, 2000

Table of Contents