Installation Guide - Axis 570 User Manual

Section 3: Basic Installation
30

Installation Guide

Installation Methods
Environment
AS/400
IBM
Mainframe
NetWare
Windows
OS/2
Macintosh(*)
UNIX
After connecting the AXIS 570/670 to your network, you are now
ready to perform the basic setup procedures. The method of
installation that you choose should be dictated by your printing
requirements and the type of network into which you are integrating.
Select the appropriate installation method from the table below:
Network Configuration
SNA
TCP/IP
SNA
TCP/IP
NDPS
NetWare
Advanced configuration
NetBIOS/NetBEUI
TCP/IP
NetBIOS/NetBEUI
AppleTalk
TCP/IP
Available installation methods for the AXIS 570/670
* Macintosh is only supported by AXIS 570 and AXIS 570e.
AXIS 570/670 User's Manual
Action
See Section 4 Setting Up - AS/400 , on page 49
See Assigning an IP address , on page 36
Proceed with Section 4 Setting Up - AS/400 , on page 49
See Section 5 Setting Up - IBM Mainframe , on page 87
See Assigning an IP address , on page 36
Proceed with
See Setup using NDPS , on page 116
See Basic Setup with AXIS NetPilot , on page 32
See Basic Setup with AXIS NetPilot , on page 32.
Proceed with Advanced Installation using AXIS NetPilot ,
on page 118
See Section 7 Setting Up - Windows , on page 123
See Assigning an IP address , on page 36
Proceed with Section 7 Setting Up - Windows , on page
123
See Section 8 Setting Up - OS/2 , on page 145
See Section 9 Setting Up - Macintosh , on page 149
See Assigning an IP address , on page 36
Proceed with Section 10 Setting Up - UNIX , on page 155