Axis 570 User Manual page 121

Section 6: Setting Up - NetWare
120
Connecting
Print Queues
Follow the steps below to connect a print queue to the print server
port:
1. Open the NetWare Network Environment window.
2. Select the print server port you want to connect.
3. Click the Connect... button. The Connect NetWare Print
Queues window appears.
The AXIS NetPilot Connect NetWare Print Queues window
4. Select the tree or server location of the print queue from the
Resources box.
5. Select an existing print queue to connect to the server port, or
create a new print queue by clicking on Create Queue... If you
have selected an existing queue, advance to step 8. Continue with
step 6 only if you want to create a new queue.
6. Type the queue name in the Create Queue dialog window. If you
want to create a queue in the NDS tree you must also enter the
name of the volume where the queue will be located. Click OK.
7. Select the newly created queue from the queue list.
AXIS 570/670 User's Manual