Axis 570 User Manual page 98

AXIS 570/670 User's Manual
Verifying the
Communication Link
Procedures
Note:
The easiest way to test the communication is by sending a print job to
the AXIS 570/670. If there are problems, press the test button once to
print the test page where you can find the present SNA link status.
1. Power on the Print Server and wait for 2 minutes.
2. Press the test button once to print a test page and ensure that the
SNA status line is defined as either:
•Idle
•Actv
•LU-1
•LU-3
Please refer to Axis' Technical Notes and FAQ on the Axis Web
site, if the status line indicates that the SNA link is not
active.
The AXIS 570/670 is now ready for use in the SNA environment.
Section 5: Setting Up - IBM Mainframe
97