Axis 570 User Manual page 72

AXIS 570/670 User's Manual
Verifying the
communication
Note:
9. Click the Submit IBM BASIC CONFIGURATION settings
button.
10. Select IBM PRINTER DRIVER from the header.
11. Make sure that the Printer Driver parameter matches the printer
driver of your printer and click the Submit IBM PRINTER
DRIVER settings button.
12. Select IBM PAGE FORMAT from the header.
13. Select the appropriate page properties and click the Submit IBM
PAGE FORMAT settings button.
Follow the instructions below to verify the communication by sending
a print job to the AXIS 570/670:
1. Type WRKCFGSTS *DEV AX570PR4 on the AS/400
command line to display the previously created printer device.
The status of the printer device should be
2. Vary on the printer device by typing
ENTER.
3. Press F5 to refresh the display. The printer device should now be
.
VARIED ON
4. Start the printer writer by typing STRPRTWTR AX570PR4 on
the AS/400 command line. Press ENTER.
5. Press F5 to refresh the display. The printer device should now be
ACTIVE/WRITER
6. Direct a printout to this printer device. A successful printout
effectively verifies the communication link between the AS/400
and the AXIS 570/670.
In the example above, the logical printer PR4 is used and the
printout is directed to the destination AX570PR4.
The AXIS 570/670 is now ready for printing in the AS/400
environment.
Section 4: Setting Up - AS/400
in the
1
.
.
VARIED OFF
field. Press
Opt
71