Axis 570 User Manual page 132

AXIS 570/670 User's Manual
Note:
TCP/IP (LPR)
Even if the desired printer is available in the Manufacturers and
Printer Models list, you are advised to use the printer driver
provided with your printer. This assures you of the latest driver
software.
9. Click the Have Disk... button. Insert the printer driver
diskette/CD that was provided with your printer, select the
appropriate diskette/CD drive and click OK.
10. Select the printer driver you want to install and click Next>.
11. Enter an appropriate name for your printer and click Next>.
12. Choose whether you want to share the printer with other network
users and click Next>.
13. Choose whether you want to produce a test page and then click
Finish.
To be able to print using LPR, you must have installed the AXIS
570/670 in the TCP/IP environment as described in
Assigning an IP address, on page 36.
1. To start the Add Printer Wizard, select Settings - Printers from
the Start menu and double-click the Add Printer icon.
2. The Wizard asks you to select My Computer or Network printer
server. Select My Computer, as the AXIS 570/670 emulates a
local printer port. Click Next>.
3. If the LPR Printer port you want to use already appears in the
available ports list, you may proceed directly to step 8. If not, click
Add Port and continue with step 4.
4. Select AXIS port from the list of available monitors in the Printer
Port dialog. Click the New Port... button.
5. Select LPR (TCP/IP) as your choice of network protocol and
click OK.
Section 7: Setting Up - Windows
131