Axis 570 User Manual page 56

AXIS 570/670 User's Manual
IPDS data streams (AXIS 570e and AXIS 670e only)
Proceed with the following instructions if you are printing IPDS data
streams:
1. Select IBM IPDS Configuration from the header.
2. Select your preferred system language from the System Language
drop-down list and click the Submit IBM IPDS Configuration
settings button.
3. Select IBM IPDS Printer Driver from the header.
4. Select the paper size for each paper bin from the from the Paper
Size drop-down list and click the Submit IBM IPDS Printer
Driver settings button.
5. Select SNA from the header.
6. Select an IPDS printer emulation from the Logical unit data
streams drop-down list that corresponds to the logical printer you
want to use. If you are using several logical printers, each
corresponding Logical unit data stream must be set.
7. Set the Automatic link establishment (dialing) radio button to
Yes and click the Submit SNA settings button. This will start the
automatic configuration process.
SCS data streams
Proceed with the following instructions if you are printing SCS data
streams:
1. Select IBM BASIC CONFIGURATION from the header.
2. Select your preferred system language from the System Language
drop-down list.
3. Select a twinax printer emulation from the Printer Emulation
drop-down list and click the Submit IBM BASIC
CONFIGURATION settings button.
4. Select IBM PRINTER DRIVER from the header.
Section 4: Setting Up - AS/400
55