Raw Tcp/Ip Printing - Scs Data Streams - Axis 570 User Manual

Section 4: Setting Up - AS/400
66
Verifying the
communication link

Raw TCP/IP Printing - SCS data streams

Before you begin
1. Type WRKCFGSTS *DEV xxxx*, where xxxx are the first
four characters of the printer device name, on the AS/400
command line. A list of printer devices will be displayed. Make
sure that a virtual printer device is active.
2. Direct a printout to this printer device to check the integrity of
the communication link.
The configuration procedures presented in this section are divided
into three separate steps:
• Configuring of the AS/400 host
• Configuring the AXIS 570/670
• Verifying the communication between the AXIS 570/670 and the
AS/400
When printing SCS data using Raw TCP/IP, the AS/400 printer
Notes:
file settings will not be sent to the AXIS 570/670. If you want to
retain a specific document style, font or orientation, the data must
be embedded in the document.
Make sure that the AS/400 host is running OS/400 V3R6 or higher
with TCP/IP support installed and configured.
AXIS 570/670 User's Manual